View MAX5217EVKIT_8995756.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

component list general description the max5217 evaluation kit (ev kit) demonstrates the max5217, 16-bit, single-channel, low-power, buffered voltage-output dac. the ic comes in an 8-pin max ? package. the ev kit provides controls to change the dac output and power operations. the dac ic is controlled by an on-board maxq ? microcontroller that provides an i 2 c interface. the ev kit features windows xp ? -, windows vista ? -, and windows ? 7-compatible software that provides a simple graphical user interface (gui) for exercising the features of the device. the ev kit comes with the max5217gua+ (16-bit, 4 lsb inl (max)) installed. contact the factory for samples of the pin-compatible max5215gua+ (14-bit, 1 lsb inl (max)) and max5217bgua+ (16-bit, 8 lsb inl (max)) versions. features wide input supply range: 2.7v to 5.5v low-power consumption (80a max) rail-to-rail buffered output configurable aux pin for asynchronous clr or ldac operation selectable output termination: 1k, 100k, or high impedance supports 14-bit and 16-bit dacs windows xp-, windows vista-, and windows 7-compatible software usb powered (cable included) proven pcb layout fully assembled and tested 19-6528; rev 0; 11/12 ordering information appears at end of data sheet. max and maxq are registered trademarks of maxim integrated products, inc. windows, windows xp, and windows vista are registered trademarks and registered service marks of microsoft corporation. designation qty description addr, aux, out, ref, sda, scl, vdd 7 red test points agnd, dgnd, gnds 3 black test points c1, c5Cc7, c19Cc22 8 1f 10%, 16v x7r ceramic capacitors (0603) murata grm188r71c105k c2, c12Cc14, c18, c27, c33 7 0.1f 10%, 16v x7r ceramic capacitors (0603) murata grm188r71c104k c4 1 200pf 5%, 50v c0g ceramic capacitor (0603) murata grm1885c1h201j designation qty description c25 1 100pf 5%, 50v c0g ceramic capacitor (0603) murata gqm1885c1h101j c15, c16 2 18pf 5%, 50v c0g ceramic capacitors (0603) murata grm1885c1h180j c17 0 not installed, ceramic capacitor (0603) h1 0 not installed, 4-pin header h2 1 10-pin (2 x 5) dual-row header ju1, ju2, ju4, ju5 4 2-pin headers ju3, ju6, ju7 3 3-pin headers ju_id0C ju_id3 0 not installed, 2-pin headers max5217 evaluation kit evaluates: max5215/max5217/max5217b
maxim integrated 2 component suppliers component list (continued) max5217 ev kit files note: indicate that you are using the max5217 when contacting these component suppliers. quick start required equipment max5217 ev kit (usb cable included) windows xp, windows vista, or windows 7 pc with a spare usb port digital voltmeter (dvm) note: in the following sections, software-related items are identified by bolding. text in bold refers to items directly from the ev kit software. text in bold and underlined refers to items from the windows operating system. procedure the ev kit is fully assembled and tested. follow the steps below to verify board operation: 1) verify that jumpers ju1Cju7 are in their default positions, as shown in table 1. 2) connect the gnds pcb pad to the negative terminal of the dvm and connect the positive terminal to measure the voltage at the out test points. 3) visit www.maximintegrated.com/evkitsoftware to download the latest version of the ev kit software, 5217rxx.zip. save the ev kit software to a temporary folder and uncompress the zip file. 4) install the ev kit software on your computer by running the install.exe program inside the temporary folder. the program files are copied to your pc and icons are created in the windows start | programs menu. 5) connect the usb cable from the pc to the ev kit board; the usb driver is installed automatically. if the usb connection was not found, a popup message appears, as shown in figure 1. follow the message to establish connection between the pc and the ev kit board. designation qty description l1 1 ferrite bead (0603) tdk mmz1608r301a r1, r2 2 4.7k? 5% resistors (0603) r3 1 1m? 5% resistor (0603) r4Cr6 3 1.5k? % resistors (0603) r8 1 100? 5% resistor (0603) r9, r10 2 10k? 5% resistors (0603) u1 1 16-bit dac (8 max) maxim max5217gua+ u3 1 voltage reference (8 max) maxim max6133a25+ u4 1 level translator (10 max) maxim max1840eub+ designation qty description u5 0 esd protector not installed (6 sot23) u7 1 3.3v ldo (5 sc70) maxim max8511exk33+ u8 1 microcontroller (64 lqfp) maxim maxq622g-0000+ usb1 1 mini-usb type-b right-angle pc-mount receptacle y1 1 12mhz crystal (hcm49) 1 max5217 ev kit cd 7 shunts 1 usb high-speed a-to-mini-b cable (6ft) 1 pcb: max5217 evaluation kit supplier phone website murata electronics north america, inc. 770-436-1300 www.murata-northamerica.com tdk corp. 847-803-6100 www.component.tdk.com files description install.exe installs the ev kit fles on your computer max5217.exe application program usbconverterdll.dll application library uninstall.exe uninstalls the ev kit software max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
maxim integrated 3 6) start the ev kit software by opening its icon in the start | programs menu. the ev kit software main window appears, as shown in figure 2. 7) within the dac group box, select the code and load selection from the command drop-down list and drag the scrollbar to the right until the data reaches 0xffff. 8) verify that the dvm measured is 2.5v. figure 1. no usb connection message table 1. jumper settings (ju1Cju7) *default position. jumper shunt position description ju1 installed* connects sda pin of the u1 ic to the on-board microcontroller. not installed disconnects sda pin of the u1 ic to the on-board microcontroller. ju2 installed* connects scl pin of the u1 ic to the on-board microcontroller. not installed disconnects scl pin of the u1 ic to the on-board microcontroller. ju3 1-2* connects addr pin of ic u1 to vdd to determine i 2 c address. see table 2. 2-3 connects addr pin of ic u1 to dgnd to determine i 2 c address. see table 2. not installed addr pin of ic u1 is not connected to determine i 2 c address. see table 2. ju4 installed* connects the aux signal of the on-board microcontroller to the aux pin of ic u1. not installed disconnects the aux signal of the on-board microcontroller to the aux pin of ic u1. ju5 installed connects load capacitor c25 and resistor r10 to the dac output of ic u1. not installed* disconnects load capacitor c25 and resistor r10 to the dac output of ic u1. ju6 1-2* connects the vdd pins of ic u1 to the on-board +3.3v supply. 1-3 connects the vdd pins of ic u1 to a user-supplied power supply between +2.5v to +5.5v. not installed user-supplied vdd. the user must apply a voltage at the vdd test point. ju7 1-2* connects the ref pin of ic u1 to the on-board 2.5v reference (max6133). 2-3 connects the ref pin of ic u1 to vdd. not installed user-supplied ref. the user must apply a voltage reference at the ref test point. max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
maxim integrated 4 figure 2. max5217 ev kit software main window max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
maxim integrated 5 detailed description of software the max5217 ev kit software controls the dac code and output voltage. other features include changing the operating modes and reference. part selection in the upper-left corner of the gui is a part selection group box. the user must select the appropriate radio button that corresponds to the installed maxim ic dac bits. i 2 c interface the software automatically detects the correct i 2 c address from the drop-down list. see table 2 for a list of the i 2 c addresses. reference when setting the reference, confirm that the vdd supply is greater or equal to the voltage reference entered for proper operation. to use the external reference, the user must enter a valid voltage in the ref edit box. command choose the appropriate command from the drop-down list and drag the data scrollbar to start writing data. optionally, the user can enter the desired data in the data edit box and press the enter key on the keyboard. refer to the max5215/max5217 ic data sheet for a list of possible commands. software reset the sw reset button allows the user to reset the code register, the dac latch, and all the configuration commands to the por default values. software clear the sw clear button allows the user to clear the code register and the dac latch to the clear value selected in the clear value group box. confguration the configuration group box includes the controls to the configuration register: clear values, aux input mode, and power-down mode of the device. clear values the user can set the dac values to zero, mid scale, or full scale when the sw clear button is pressed. aux pin the user can use the aux pin for ldac and clr operations. once the appropriate selection is made, the aux pin can be driven high, low, or pulsed. refer to the max5215/max5217 ic data sheet for a detailed descrip - tion of aux pin functions. dac outputs when the output of the dac is not in normal operation, the output can be powered down with a 1k termination to gnd, 100k termination to gnd, or high impedance. read back the product id is read when an address is detected. within the dac group box, press the read back button and the code and voltage of the dac are displayed. within the configuration group box, press the read back button and the clear values, aux pin, and dac outputs are read back. multiple ev kits the software can communicate to multiple max5217 ev kits connected to the usb ports on the pc. the status bar at the bottom of the gui shows the number of boards that are connected. if all boards connected to the pc are not connected to the gui, click the connect menu item and the status bar should be updated. use the board index drop-down list to select the appropriate ev kit for communication. table 2. i 2 c address setting *default position. ju3 shunt position (addr) a6 a5 a4 a3 a2 a1 a0 r/w write address (hex) read address (hex) 1-2* 0 0 1 1 1 1 1 0x3e 0x3f 2-3 0 0 1 1 1 0 0 0x38 0x39 not installed 0 0 1 1 1 0 1 0x3a 0x3b max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
maxim integrated 6 detailed description of hardware the max5217 ev kit provides a proven layout for the max5217 dac. an on-board maxq622 microcontroller and jumpers to disconnect the on-board microcontroller are included on the ev kit. i 2 c address the i 2 c address of the device is determined by the shunt settings of jumper ju3. see table 2 for all possible hexadecimal addresses. user-supplied power supply the ev kit is powered completely from the usb port by default. to power the device with a user-supplied power supply, remove the shunt on jumper ju6 and apply a 2.7v to 5.5v power supply at the vdd test point and the near - est agnd test point on the ev kit. user-supplied reference the user can apply a user-supplied voltage reference by removing the shunt on jumper ju7 and applying 2v to vdd at the ref test point on the ev kit. user-supplied i 2 c to evaluate the ev kit with a user-supplied i 2 c bus, remove shunts from jumpers ju1 and ju2. apply the user-supplied i 2 c signals to the scl and sda test point and use the nearest dgnd test point for the return ground on the ev kit. if pullup resistors are on the user-supplied interface, resistors r1 and r2 should be removed. user-supplied aux a user-supplied aux signal can be used by removing shunts from jumper ju4. apply the user-supplied aux signal to the aux test point and use the nearest dgnd test point for the return ground on the ev kit. max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
maxim integrated 7 figure 3a. max5217 ev kit schematic (sheet 1 of 2) max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
maxim integrated 8 figure 3b. max5217 ev kit schematic (sheet 2 of 2) max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
maxim integrated 9 figure 4. max5217 ev kit component placement guidecomponent side figure 5. max5217 ev kit pcb layoutcomponent side max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
maxim integrated 10 figure 6. max5217 ev kit pcb layoutsolder side max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
maxim integrated 11 # denotes rohs compliant. ordering information part type MAX5217EVKIT# ev kit max5217 evaluation kit evaluates: max5215/max5217/max5217b www.maximintegrated.com
? 2012 maxim integrated products, inc. 12 revision history revision number revision date description pages changed 0 11/12 initial release maxim integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a maxim integrated product. no circuit patent licenses are implied. maxim integrated reserves the right to change the circuitry and specifcations without notice at any time. max5217 evaluation kit evaluates: max5215/max5217/max5217b maxim integrated and the maxim integrated logo are trademarks of maxim integrated products, inc. for pricing, delivery, and ordering information, please contact maxim direct at 1-888-629-4642, or visit maxim integrateds website at www.maximintegrated.com.

▲Up To Search▲

Price & Availability of MAX5217EVKIT

	To Download MAX5217EVKIT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .